Fraste MD/ml
53 000EUR
Цена без НДС
- ≈ 96 726 AZN
- ≈ 56 897 USD
Fraste FS250
139 626EUR
- ≈ 254 821 AZN
- ≈ 149 894 USD
Fraste FS250
40 621EUR
- ≈ 74 134 AZN
- ≈ 43 608 USD
Caterpillar MD5090
107 530EUR
- ≈ 196 245 AZN
- ≈ 115 437 USD
EGT MD 1500-3
95 000EUR
- ≈ 173 377 AZN
- ≈ 101 986 USD
Atlas Copco BOLTEC MD
SPD MD 45 drilling attachment
IVECO Eurocargo ML10022e Drilling crane machine
36 500EUR
Цена без НДС
- ≈ 66 613 AZN
- ≈ 39 184 USD
2008 Nemek 810 TST borerigg
Atlas Copco ROC L6 (2008)
92 000EUR
- ≈ 167 902 AZN
- ≈ 98 765 USD
Буровая машина Fraste Multidrill MD/ML
Опубликовано: 3г. 7мес.
У нас есть другие объявления похожие на этот товар
Посмотреть товары в наличииОпубликовано: 3г. 7мес.
47 170EUR
- ≈ 86 086 AZN
- ≈ 50 638 USD
2 Ноябрь 2020
Хотите узнать цены на похожие предложения?
Посмотреть товары в наличииОбъявление удалено из нашей базы данных. Вы можете заказать: Fraste Multidrill MD/ML
Не нашли технику?- Chassis MAN 13.240, 4 WD
- Chassi: MAN
- Engine emission: Euro 5
- No. of winches: 1
- Transport dim. (L x W x H) m: 7,3 x 2,4 x 3,9
- License plates: Is not included, Registration certificate included
- Is visually reviewed, but not fully tested in all functions: Yes
- Water in the cooler OK: Yes
- Engine oil OK: Yes
- Engine OK: Yes
- Technical condition (1-5) 5=best: 4
140 m drill rods (for flush drilling).
With water pump.
MAST: The broker is made of strong H profile with side guide which forms the guide for the broker car. The tightening force on the rotary motor comes from a gear motor mounted on the mast top.
Max travel of rotational head 5200 mm, Max lifting force on rotary head 3200 kg, Max pressure on rotational head 3200 kg.
Bottom clamp for ø 60 mm to 280 mm casing, swivel type max opening 500 mm.
Rotary head R012D100 - Rotary head for direct rinsing:
Rotary head spindle has max Ø 100 mm bore drilled with mudinjeclion swivel unit ID 100 mm, Max torque in high range 650 kgm at 126 rpm, Max torque in low range 325 kgm at 63 rpm The rotary head has two hydraulic motors connected in parallel, rotary head can be hydraulically tilted 90 degrees.
Game: The hydraulic hoisting winch has a lifting capacity of 2000 kg max wire capacity of 30 m ø 10 mm - speed 40 m per min.
Frifald percussion: Frifald percussion lifting capacity 500 kg with 500 mm lifting height and from 0 to 40 strokes per min. XL Model.
Centrifugal pump Type Capari MEC A3 / 80 A Hydraulic centrifugal mud pump speed controllable from control panel. Max output 3000 I per min. Max bar 8 flush hose 100 mm. Fraste Multidrill MD/ML - Chassis MAN 13.240, 4 WD
47 170EUR
- ≈ 86 086 AZN
- ≈ 50 638 USD
2 Ноябрь 2020
Хотите узнать цены на похожие предложения?
Посмотреть товары в наличииОбъявление удалено из нашей базы данных. Вы можете заказать: Fraste Multidrill MD/ML
Не нашли технику?